Introduction
plastic Agglomerator can directly make waste plastic films and other products less than 2mm wall thickness into granules. It is suitable to agglomerate the waste products or films made of soft PVC, HDPE, LDPE, PP and other thermo plastics. When the waste plastic is supplied into the chamber of such machine, it will be cut into smaller chips due to the crushing function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the material will be going to become semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the crushed material. The water will be evaporated off quickly and the surface temperature of crushed material drop down quickly. So the crushed material will become small particles or granules. It is easy to recognize the particles by different size and can be colored by using of color agent being putted into the container during the crushing processing.
The particles can be used for extrusion or injection mould machine directly. Also can be further pelletized for some advanced requirements.
This machine is qualified with certificate ISO9001:2000 and CE certificate.
Technical Parameter of Agglomerator
| Item | Name | Remarks |
| 1 | Total volume | 200L |
| 2 | Effective volume | 150L |
| 3 | Number of rotating blade | 2Pcs |
| 4 | Number of fixed blade | 6Pcs |
| 5 | Material of blade | 9Crsi |
| 6 | Rotating speed of axis | 1000rpm |
| 7 | Motor power | 55KW |
| 8 | Motor voltage | 3phase, 380V, 50Hz or customized |
| 9 | Water consumption | 5-10L/h |
| 10 | Contactor | DELIXI |
| 11 | Capacity | About100-150kg/hr for PP material |
| 12 | Agglomerator dimension | 1700x850x1500mm(L X W X H) |
| 13 | Agglomerator weight | 1.2 Ton |
| 14 | Dimension of control cabinet | 760x350x1250mm(L X W X H) |
| 15 | Weight of control cabinet | 150kg |
Details machine photos
| Item | Description | Photo |
| Foundation | Reinforced base
Stainless steel |
 |
| Chamber | Stainless steel 304 chamber |  |
| Bearing cooling | Oil circulation cooling method better than water cooling |   |
| Outlet | Pneumatic control |  |
| Electrical elements | Main electrical elements are Siemens brand |   |
| Blades | 8 fixed blades
4 rotating blades Blades material: 9Cr |
 |
| Final pe film granules： |  |
|
| Final PP granules： |  |