One cavity PVC pipe extrusion production line
Φ20-Φ630 series PVC pipe extrusion machine line is mainly used in the manufacture of plastic PVC pipes with various diameters and wall thickness used in the industries such as agricultural and constructional plumbing, cable laying etc.
This line is composed of conical twin screw extruder, Vacuum calibration tank, haul off, motors, cutter and stacker etc. The extruder and haul off methods are two-claw, three-claw four-claw, six-claw, eight-claw, ten-claw, twelve claw etc. You may choose saw blade cutting type or planetary cutting type. It is additionally attached with length counter and intensifying device.
This line with reliable performance and high production efficiency. Our company can also manufacture special pipe production lines, e.g. spiral silencing pipe and core foaming pipe according to your requirements.
Two cavities PVC double-pipe production line
Φ16-Φ200 series PVC double tube production line is developed with the advanced technology of west Europe by our company.
The main machine is SJSZ55/120 or SJSZ65/132 or SJSZ80/156 conical twin screw extruder is equipped with double-tube single control stainless steel spraying calibration, it avoids waste condition when one tube is adjusted and the other one is affected. The auto single-control double haul-off machine and cutting machine are combined with the front double calibration technology to make operation more flexible let you enjoy economic benefit which is brought by separate-control double tube extruding.
Four cavities PVC four-pipe production line
Φ16-Φ32 series Four cavities PVC electrical tube/water supply pipe extrusion line can extrude four pipes at same time on one machine. This line can save investment cost in factory building and production, which increase the capacity a lot and reduce production time.
SJSZ65 conical twin-screw extruder can easily reach 5.5-6.5 ton/per day, the production speed take 16mm as example can get more than 8-10m/min. The whole line is composed of conical twin-screw extruder 65mm, 4 cavity mould, 4 cavity cooling calibration tank, 4 station haul off, 4 station cutter and 4 station tipping table